How to use the automatic packaging machine?

May 04, 2021

Now, the previous technologies in all aspects are constantly developing, and industrial production will become more and more simple and easy. In the past, packaging was done manually. Now with the automatic packaging machine, the entire packaging process will be more convenient and make The packaging machine can bring us more convenience, and some problems should be paid attention to in the normal use process.


Every time you turn on the device, you must carefully check it to see if there are other abnormalities in the equipment. If there is no abnormality, you can start and use it normally. The machine must readjust its body and hands when it is running. All these parts cannot be approached or touched.


When the machine is working normally, we cannot operate the automatic packaging machine at will, nor can we switch various operation buttons, nor can we change the setting of internal parameters at will. If these numbers are replaced, the next job will be greatly affected, and various problems will occur, so these aspects must be carefully controlled. Various equipment is becoming more and more advanced. We must pay attention to the specific situation when using the equipment. Usually, when operating the equipment, two or more people cannot operate various buttons and mechanisms at the same time. We should do a good job in daily maintenance work carefully. Do maintenance work in time. If there are some problems, we must learn to pass them.


Usage of automatic packaging machine:

1. When the automatic packaging machine is in use, the power switch needs to be turned on. The power selection switch points to vacuum for vacuum sealing, and for vacuum filling to vacuum filling and sealing.

2. Put the plastic bag containing the articles in the vacuum chamber, and place the bag mouth neatly on the heat sealing strip.

3. Press down the cover, and the exhaust indicator on the panel lights up. The vacuum pump starts to pump, and the cover is automatically sucked. The vacuum knob can adjust the vacuum level according to the packaging requirements. When adjusting, the visual scale is from low to high, and the amplitude is required. small.

4. When the pumping reaches the set time, the pumping indicator light goes out and the inflation indicator light is on to indicate the start of inflation. The inflation knob can adjust the length of the inflation time. If inflation is not required, turn the power switch to the vacuum position, and the program will automatically Enter the vacuum packaging, the inflation indicator light goes out.

5. When the air is pumped or inflated, the indicator light will go out and the heat sealing indicator light will be on, and the sealing process will be entered. The panel is equipped with heat sealing time and temperature adjustment knobs to adapt to different thickness materials. When adjusting the time and temperature, turn The moving range should be small to prevent the heat-sealing temperature from suddenly increasing and burning out the heat-sealing parts.

6. When the set heat-sealing time is reached, the heat-sealing indicator light goes out, indicating that the heat-sealing is over, and the next packaging cycle is ready.

Get the latest offers
Subscribe for our newsletter
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Chat Now
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

whatsapp